Installing The Tie Rods - Yamaha YFM400FAR Service Manual

STEERING SYSTEM
G
Install the new bearings.
NOTE:
Install the outside bearing first.
CAUTION:
Do not strike the center race or balls of the
bearing. Contact should be made only with
the outer race.
G
Install the new oil seals.
NOTE:
When installing the oil seals, the "seal side" of
the oil seal faces out.
*****************************************************

INSTALLING THE TIE RODS

1.Install:
Tie rods (left and right)
G
NOTE:
The tie rod which must be installed on the out
side has grooves 1.
2.Adjust:
Toe-in
G
Refer to "ADJUSTING THE TOE-IN" in
CHAPTER 3.
8 - 39
CHAS
30 Nm (3.0 m • kg, 22 ft • lb)