CYLINDER HEAD
NOTE:
Fasten a safety wire to the timing chain to
G
prevent it from falling into the crankcase.
When removing the camshaft sprocket, it is
G
not necessary to separate the timing chain.
5.Remove:
Cylinder head
G
NOTE:
Loosen the 6 mm bolts first.
G
Working in a crisscross pattern, loosen each
G
10 mm bolt 1/4 of a turn. After all the bolts
are loosened, remove them.
CHECKING THE TAPPET COVERS
1.Check:
Tappet covers 1
G
O-rings 2
G
Cracks/damage → Replace.
CHECKING THE TIMING CHAIN
TENSIONER
1.Check:
One-way cam operation (tensioner)
G
Unsmooth operation → Replace.
CHECKING THE CAMSHAFT SPROCKET
1.Check:
Camshaft sprocket
G
Wear/damage → Replace the camshaft
sprocket and timing chain as a set.
a 1/4 of a tooth
b Correct
1 Timing chain
2 Sprocket
4 - 11
ENG