Yamaha YFM400FAR Service Manual page 461

REAR BRAKE
CAUTION:
During installation, lightly grease the brake
camshaft and the pivot pin. Wipe off the
excess grease.
2.Install:
Brake shoe wear indicator 1
G
NOTE:
When installing the wear indicator pointer, fit
the projection into a brake camshaft groove
and align the pointer with the right end of the
wear indicator scale 2.
3.Install:
Brake camshaft lever 1
G
Bolt (camshaft lever):
9 Nm (0.9 m • kg, 6.5 ft • lb)
NOTE:
When installing the brake camshaft lever, align
the punch marks 2 on the brake camshaft
lever and brake camshaft.
4.Apply:
Sealant 3
G
(onto the mating surfaces of swingarm)
Sealant (Quick Gasket)
P/N. ACC-11001-05-01
Yamaha bond No. 1215:
P/N. 90890-85505
5.Install:
Brake shoe plate 1
G
Bearing retainer 2
G
Brake shoes 3
G
Spring 4
G
Plate 5
G
Cotter pins 6
G
Bolt (bearing retainer):
28 Nm (2.8 m • kg, 20 ft • lb)
– 87 –
CHAS
®
:
New