Table of Contents
Advertisement
Path - Specifies the location of each character with respect to the preceding character,
relative to the labeling direction defined by the DI or DR commands. The text path set by
the DV command is not affected by changes in scaling points P1 and P2.
0: 0 degrees. (Right) Within a label, each character begins to the right of the
previous character. This is a horizontal text path (unless altered by the DI or
DR commands).
1: 90 degrees. (Down) Within a label, each character begins below the previous
character. This is a vertical text path (unless altered by the DI or DR
commands).
2: 180 degrees. (Left) Within a label, each character begins to the left of the
previous character. This is a horizontal text path (unless altered by the DI or
DR commands).
3: 270 degrees. (Up) Within a label, each character begins above the previous
character. This is a vertical text path (unless altered by the DI or DR
commands).
Line - Specifies the location of each character with respect to the preceding character
relative to the text printing direction defined by the DI or DR commands.
0 to –90 degrees. (Normal Line Feed) Sets the direction of line feeds –90 degrees
with respect to the text path.
0 to +90 degrees. (Reverse Line Feed) Sets the direction of line feeds +90 degrees
with respect to the text path.
*
"This information is subject to change without notice. This information is provided "as is" without either express or
implied warranty. IntelliTech International, Inc. disclaims any and all warranties with regard to this information.
IntelliTech shall not be liable in any event for any special, indirect or consequential damages or any damages whatsoever
resulting from loss of data, profits or use, for any reason or in any action, arising out of or in connection with the use or
performance of this information. "
HP PCL Font Characteristics
6-33
Advertisement
Table of Contents
