Setting Bar Code Width in Dots
NOTE: 1 Dot = 1/300 inch. The Set Bar Code Width command allowable range = 1 to 6 Dots.
ZBCW1
Set Bar Code Width (Dots) = 1
ZBCW2
Set Bar Code Width (Dots) = 2 Default
ZBCW3
Set Bar Code Width (Dots) = 3
ZBCW4
Set Bar Code Width (Dots) = 4
ZBCW5
Set Bar Code Width (Dots) = 5
ZBCW6
Set Bar Code Width (Dots) = 6
Setting Bar Code Ratios (Code 39, Extended 3 of 9, and Interleaved 2 of 5)
ZBCR1
Set Bar Code Ratio, Ratio of 2 to 1
ZBCR2
Set Bar Code Ratio, Ratio of 5 to 2
ZBCR3
Set Bar Code Ratio, Ratio of 3 to 1, Default
Setting Bar Code 128 Subset Mode
ZBSM0
Set Bar Code 128 Subset Mode 0, Automatic subset switching,
Default
ZBSM1
Set Bar Code 128 Subset Mode 1, Subset A (upper case/control
characters)
ZBSM2
Set Bar Code 128 Subset Mode 2, Subset A (upper and lower
case characters)
ZBSM3
Set Bar Code 128 Subset Mode 3, Subset A (double density
numbers)
Setting UPC-E Bar Code Method
ZBCM0
Set UPC-E Bar Code Method 0, Requires 11 digits to print 6 digit
bar code, Default
ZBCM1
Set UPC-E Bar Code Method 1, System 0, 6 digit input string
ZBCM2
Set UPC-E Bar Code Method 2, System 1, 6 digit input string
Setting Print Position for Human-Readable Text
ZTXT0
Print Human-Readable Text = 0 Disable, Default
ZTXT1
Print Human-Readable Text, Position = 1, below barcode with
check digit
ZTXT2
Print Human-Readable Text, Position = 2, below bar code without
check digit
ZTXT3
Print Human-Readable Text, Position = 3, above bar code with
check digit
ZTXT4
Print Human-Readable Text, Position = 4, above bar code without
check digit
ZTXT5
Print Human-Readable Text, Position = 5, in notched bar code
with check digit
ZTXT6
Print Human-Readable Text, Position = 6, in notched bar code
without check digit
IntelliBar M Series SAP Device Type Commands
11-8
ESC!b1N
ESC!b2N
ESC!b3N
ESC!b4N
ESC!b5N
ESC!b6N
ESC!b1R
ESC!b2R
ESC!b3R
ESC!b0S
ESC!b1S
ESC!b2S
ESC!b3S
ESC!b0E
ESC!b1E
ESC!b2E
ESC!b0T
ESC!b1T
ESC!b2T
ESC!b3T
ESC!b4T
ESC!b5T
ESC!b6T