Initialize (In) - IntelliTech Intellibar M48 Reference Manual

9-50 HP PCL Graphics Commands
Function
Polygon Mode
Raster Fill
Scalable or Bitmap Fonts
Scale
Screened Vectors
Standard Font Definition
Absolute Character Size
Character Slant
Symbol Mode
Select Standard Font
Transparency Mode
Transparent Data
User-defined line type
In addition, the printer updates the carriage return point for text printing to the current pen
location.
The DF command does not affect the following HPGL/2 conditions:

locations of P1 and P2

current pen, its location, width, width unit selection, and up/down position

HPGL/2 drawing rotation

Initialize (IN)

This command resets all programmable HPGL/2 functions to their default settings. Use the
IN command to return the printer to a known HPGL/2 state and to cancel settings that may
have been changed by a previous command sequence. (The ESC E reset command issues
an automatic IN command.)
IN [;]
Table 9-36 Default Settings (cont'd)
Command
PM
RF
SB0
SC
SV
SD
SI
SL
SM
SS
TR1
TD
UL
NOTE: Once HPGL/2 mode is entered and
commands are issued, the HPGL/2 conditions
are no longer initialized. To place HPGL/2 into
the default state, send the IN command.
Default Condition
Polygon buffer cleared
Solid black
Scalable fonts only
User-unit scaling off
No screening
Stick Font (11.5 point, 9
characters per inch, upright,
medium)
Turns off size transformation
No slant
Turns off symbol mode
Standard font selected
Transparency mode on
Normal printing mode
Defaults all 8 line types