IntelliTech Intellibar M48 Reference Manual page 177

M series
Table of Contents

Advertisement

INTELLIBAR M SERIES SAP DEVICE TYPE PRINT CONTROL
COMMANDS
In addition to the standard HP PCL5 commands supported by the IntelliBar M Series
ZITC_XXX Device Types, IntelliBar M Series printers use custom PCL Command
extensions that enable thermal label printing functions and provide access to internal
printer resident bar code fonts. In the SAP environment these Command extensions are
accessed through custom SAP "Z" print commands. Table 11-5 below lists the IntelliBar
M Series custom SAPScript Format Types, a description of the Command and the
corresponding PCL5 command extension in escape code sequence.
Тable 11-5 IntelliBar M Series PCL Command Extensions Cross Reference to
Sap "Z" Print
Function
Command
Code
Setting/Disabling Variable Form Length
NOTE: The Variable Form Length command allowable range = 300 to 29,700 scan lines (= 1"
to 99"/ 2.5 cm to 252 cm) in increments of 300 scan lines (= 1"/ 2.5 cm). Use the next longer full inch
form length for form lengths that have fractional inches. For example, if form length = 8.5" then use
the 9" form length command, "ZSF09".
ZSFVL
Set Variable Form Length = the last selected value
ZSF01
Set Variable Form Length = 1"
through
ZSF99
Set Variable Form Length = 99"
ZDFVL
Disable Variable Form Length
Setting Print Speed
NOTE: The default Set Print Speed command is printer model dependent.
ZPS01
Set Print Speed = 0.6" (15 mm)/sec
ZPS02
Set Print Speed = 0.8" (20 mm)/sec
ZPS03
Set Print Speed = 1.2" (30 mm)/sec
ZPS04
Set Print Speed = 1.6" (40 mm)/sec
ZPS05
Set Print Speed = 2.4" (60 mm)/sec
ZPS06
Set Print Speed = 3.2" (80 mm)/sec
IntelliBar M Series SAP Device Type Commands
NOTE: For greater detail about IntelliBar M
Series PCL command extensions, as well as
standard HP PCL commands, refer to the
relevant portion of Section 2 of the IntelliBar M
Series Programmer's Reference Manual.
SAP Z Print Control Command Codes
11-5
PCL Escape
Command Code
ESC!f1Z
ESC!f300Z
through
ESC!f29700Z
ESC!f0Z
ESC!p15S
ESC!p20S
ESC!p30S
ESC!p40S
ESC!p60S
ESC!p80S

Advertisement

Table of Contents
loading

This manual is also suitable for:

Intellibar m412Intellibar m88

Table of Contents