IntelliTech Intellibar M48 Reference Manual page 173

Section 11
IntelliBar M Series SAP Device Types
This section describes IntelliBar M Series Device Types developed for SAP R/3 and later.
SAP uses a proprietary printer spool and print system that provides a uniform user printing
interface that supports a multiplicity of printers. A specific SAP printer Device Type
provides the interface between the SAP Spooler and a particular printer. IntelliTech has
developed SAP Device Types for IntelliBar M Series printers that provide bar code label
printing capability for a wide range of media.
SAP PRINTING WITH INTELLIBAR M SERIES PCL COMMAND
EXTENSIONS
Standard Series IntelliBar M Series printers use the Hewlett Packard Printer Control
Language level 5, HP PCL 5, for raster image processing tasks. Hewlett Packard LaserJet
III (LJIII) printers use HP PCL5. Thus, IntelliBar M Series printers appear as an LJIII to a
host system. LJIII printers operate in the SAP environment by using the standard SAP
HPLJIIID Device Type.
IntelliBar M Series printers operate in the SAP environment by using custom "Z type"
Device Types that are derived from the HPLJIIID Device Type. IntelliBar M Series
Device Types use HPLJIIID ABAP List Format Types. The IntelliBar M Series Device
Types and their ABAP List Format Types are described below.
INTELLIBAR M SERIES SAP DEVICE TYPES
There are three custom device types for the IntelliBar M Series Standard printer series:
SAP Device Type

ZITC_48

ZITC_412

ZITC_88
INSTALLATION OF INTELLIBAR M SERIES SAP DEVICE TYPES
To install IntelliBar M Series Device Types, download the required Device Type from the
IntelliTech International web site at http://www.intellitech-intl.com/portasp/drivers.asp.
Copy the Device Type onto the target SAP host system by using the SAP RSTXSCRP
report. Assign the Device Type to the IntelliBar M Series printer using the SAP
administrative dialog.
IntelliBar M Series Standard Printer Series
M48
M412
M88