NAPCO GEM-RP1CAe2 Operating Manual page 7

S E T T I N G T H E AL AR M ( AR M I N G ) W H E N L E AV I N G
   

   

GEM-RP1CAE2.pub
page 7


  
If you attempt to arm with a "

 
cated trouble code (e.g. " " (low battery); see SYSTEM TROUBLE ERROR
CODES), a 3-second tone will sound at the keypad. The window will display "

    


". If you cannot correct the problem immediately, press-
ing the button will enable you to arm in this condition. Be sure to call for
service as soon as possible.
Easy Exit (Easy Exit programmed?
Your System may have been programmed to allow Easy Exit, which allows a
user to exit the premises with the system armed. If the
while the system is armed, it will begin the Exit Delay countdown, permitting you to
open the Exit / Entry door and leave the premises.
This will allow, for example, an early morning commuter to exit the house in
the morning, without having to disarm and rearm the system, waking the family.
" display alternating with an indi-




YES NO.)
button is pressed
Tuesday, September 29, 1998 09:28
7