Paitec ES3000 User Manual page 14

Job Sep(Auto Start) Mode
1. Check the „Ready State‟ of the OP Panel.
2. Adjust the fold-position of the 1
position[Page 11].
3. Press the [ASM] button after activating the „batch mode‟ at the first.
3. Check the LED lamp of ASM on the panel is turned on.
4. To press the [ASM] button once again for deactivating the ASM option..
TIP. Batch + Job Sep function
If the „Batch mode‟ is using with „Job sep‟, batched working is operating continuously with
3-seconds-interval.
st nd
and 2 CST by using the setting guide of the fold-
Ready 7
A10 0
[Batch mode + Job Sep]
- 14 -
OP panel guide-5