Paitec ES3000 User Manual page 13

1. [Start/Stop] is clicked one time the machine starts to work and clicked once more the
machine is stopped.
2. If the [Reset] is clicked a Working Count becomes „0‟ and Paper Thickness is initialized.
Ready
[Ready state]
Batch Count Mode
1. Check the „Ready State‟ of the OP Panel.
2. Adjust the fold-position of the 1
position[Page 11].
3. Press the [Count] button and check the LED is turned on.
3. To hold down the [Count] button shows „Batch count setting „ when the „Batch mode‟ is
activated. The number of batch count can be changed [from 1 to 200] every time the
[Direction] buttons are pressed. The count will moving faster if hold down [Direction]
4. Hold d o w n the [Count] button for saving the count.
Batch
Set 10
[Count setting]
7 Work
0
[Work state]
st nd
and 2 CST by using the setting guide of the fold-
Ready
B10
[Batch set]
- 13 -
OP panel Guide -4
13
[Paper thickness]
6
[Working count]
7
0