Auto White Balance 3200K Standard Data Input (2) - Sony Cyber-shot DSC-F707 Service Manual

11. Auto White Balance 3200K Standard Data Input (2)

Adjust the white balance standard data at 3200K.
Mode CAMERA
Subject Clear chart
(Standard picture frame with the
zoom lens at WIDE end)
Adjustment Page F
Adjustment Address B4, B5
Note 1: Check that the data of page: 6, address: 02 is "00".
If not, turn the power of unit OFF/ON.
Note 2: Refer to "Picture Frame Setting" for YH and YL.
Note 3: "Auto White Balance 3200K Standard Data Input (2)" is
available only once after the power is turned on. Turn the
power off, then on again if the adjustment is retried.
Adjusting method:
Order Page Address Data
1 0 01 01
2
3 6 2C 01
4 6 90 00
5 6 91 00
6 6 92 YL
7 6 93 YH
8 6 01 79
9 6 07
10 6 01 00
11 6 01 11
12 6 13 AB
13 6 01 D1
14 6 02
Note 4: The adjustment data will be automatically input to page:
F, address: B4 and B5.
Processing after Completing Adjustment:
Order Page Address Data
1 6 01 00
2 6 13 00
3 6 2C 00
4 6 92 00
5 6 93 00
6
7 0 01 00
Procedure
Perform "Data setting during
camera system adjustment".
(Refer to page 5-13)
(Note 2)
(Note 2)
Press PAUSE button.
Check the data changes to
"01".
Press PAUSE button.
Press PAUSE button.
Press PAUSE button.
(Note 4)
Check the data changes to
"01".
Procedure
Press PAUSE button.
Release the data setting
performed at step 2.
(Refer to page 5-13)
5-21
DSC-F707