Technical Specifications - Eurocave INOA25 Operating And Installation Instructions

5 - T
ECHNICAL SPECIFICATIONS
INOA CELLAR CONDITIONER
F
UNCTION
The purpose of the cellar conditioner is to climate control any kind of fully
insulated room creating an ideal wine cellar environment by monitoring and
adjusting the temperature and humidity.
T
EC HNOLO GY
The conditioner's housing is dampened against sound and the compressor
and fans are fitted with silent blocks to absorb any residual vibration.
A quiet conditioner: the system automatically adjusts speeds to ambient
temperature conditions, combined with the use of particularly quiet fans,
allows the conditioner to operate very discreetly.
Energy efficiency: Inoa conditioners use the compressor infrequently,
insulation between the condenser and the evaporator minimises any
exchange between the cold and hot sections of the appliance, thus favouring
energy efficiency.
The Inoa come as standard with the hot air discharge opposite the cold air
exit. It can be ordered with the hot air exit on the left or the right side as an
option.
I
NOA
EuroCave Inoa 25 Cellar conditioner
Dimension W385 x D322 x H1250 mm
Weight: 43 KG
Power supply 230V / 50 Hz
Volume up to 25 m3 (*)
Cooling Capacity 600W
Electrical Power 500W (**)
Heater element 650W
Cooling Gas: R134a
External Temp -5°C to 35°C
Noise level: 44dbA – 50dbA
Supplied with a 3.50 m power lead without plug
Ref: INOA 25
* for an isolated wine cellar following our advice please refer to our insulation guide
** for an internal temperature of 12°C and an external temperature of 32°C
Important information
For insulation, installing, positioning and more please make sure you have read our Installation
guide and our Insulation guide.
S
P ECI F ICATIONS
25 I
NOA
EuroCave Inoa 50 Cellar conditioner
Dimension W385 x D322 x H1250 mm
Weight: 46 KG
Power supply 230V / 50 Hz
Volume up to 50 m3 (*)
Cooling Capacity 1200W
Electrical Power 800W (**)
Heater element 650W
Cooling Gas: R134a
External Temp -5°C to 35°C
Noise level: 44dbA – 50dbA
Supplied with a 3.50 m power lead without plug
Ref: INOA 50
50
7