Iv- Installing The Remote Control; V- Setting The Temperature - Eurocave INOA25 Operating And Installation Instructions

10 - C

IV- Installing the remote control

You can install the remote control inside your cellar.
W e recommend that you place it as close as possible to the bottles.
Fix the unit close to your bottles using the supplied pegs and screws (see diagram below)
N .B.: Do not place the remote control in the path of the conditioner's cold air ow.
It is also possible to place the remote control outside the cellar.
In this case, an external sensor (supplied) must be connected to the remote control and then the remote control must be reprogrammed.
For further details, contact your EuroC ave retailer.

V- Setting the temperature

Setting the temperature of your conditioner is carried out entirely from the remote control which has the following layout:
C ellar
temperature
display
Temperature
indicator
C ellar temperature
setting keys
To adjust the temperature:
- Press then immediately release the
T he setting then appears (the temperature ashes).
- - W hen the temperature ashes, you have 7 seconds to change the setting by pressing the
the previous setting.
T he recommended setting range for maturing wine: 10 to 14°C .
OMMISSIONING YOUR CONDITIONER
Selection and con rmation key
key.
Temperature
units (according
to the country)
- Temperature display: displays the actual temperature inside
your cellar.
- Setting keys: allow you to select the desired temperature
inside the cellar.
or keys, otherwise the display automatically returns to
19