PLAYBACK
Play
You can play data stored in the HDD and backup a desired portion of the data.
Using the mouse may help make setup easier.
1. In Live mode, click <Play> in the right-click menu or
<
> in the launcher menu, or press the Play button on
the remote control or the front panel.
2. Use the up/down button () to select a menu.
For data search, refer to <Search>. (Page 74)
3. Select a data item and click <Play> in the Search menu.
The selected data is played and the play launcher appears
on the screen.
If there is an existing data, <Play> will start immediately without
performing the search.
• Playback Information : Displays the date and time of the
current data in the top corner.
• Backup : Click <
time of backup; you can specify a backup area using the
mouse (yellow triangle).
Click <
> again to set the current time to the end time of
the backup and the "Backup Range" window appears.
- Type : Supports formats of DVR, AVI and SEC.
Refer to a list of formats in "Setting the Backup".
(Page 62)
- Device : Select a backup device.
- Check Capacity : Enables you to check the capacity of the
selected storage device.
4. If you want to return to the Live screen in Play mode, click <
[ ] button on the remote control or the front panel.
> to set the current time to the start
2012-01-01 01:10:25
2012-01-01
01:10:25
2012-01-01 01:10:25
2012-01-01 01:10:25
Backup Range
Start
End
2012-01-01 00:01:06
2012-01-01 08:25:45
Device
USB-Storage
Type
Folder
\20120101\
Filename 0001
Backup
Check capacity
Used
Free
Backup
Cancel
> in the launcher menu or press the
Scene Mode
Spot Out
ZOOM
Audio Off
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Logout
PTZ
Alarm
Freeze
DVR
Change
0
0
0
English _77