Advertisement
PABX Telephone Switching System User Manual v1.02
1.The system has two mode of transfering the CO.line call.By flash or by pressing *,in the
default setting,the system is on the mode of patting hook switch for transfering.You can
change the mode by programming:
Enter the programming state on Ext.600,
52 ABC 1#
To transfer the call by pressing *.
52 ABC 0#
To transfer the call by patting hook switch or R button.
When ABC is ***,it means all extensions.
2.If two units use the same systems,please set one by flash,and the other system by pressing
*.Or you can set both of the systems by flash.
The system secret code is 88888.
Baud Rate:2400
Parity Bit:N
Word Length:8
Stop Bit:1
Connect COM1 or COM2 or USB port in the computer.
Connect the software dog connector with the printer port in the computer.
1. All PBX Program settings should be made after entering into the system
programming state. To enter the programming state dial * # 99 ABCD # (ABCD = system
programming password. The default password is 0000 ) using Ext.600.
2. m stands for CO line - code(01-08,**). A CO Line is the outside telephone company
line(s) connected to the CO Line Input Jacks. When m =**, it stands for all CO.lines. abc
stands for extension number. When abc=***, it stands for all extensions.When the
extension number is four digits ,abc stands for four digits extension number.
3. All the extensions should be standard DTMF (touch tone) telephone sets connected
to the extension jacks using standard rj-11 plugs.
4. CO line in this manual refers to the telephone line(s) from your local telephone
company connected to the CO line jacks using standard single line rj-11 plugs.
Programming State – To program the PBX settings:
Lift handset of extension port 600, listen for high pitched intercom dial tone and dial * #
99 ABCD # (ABCD = system programming password. The default password is 0000). The
intercom dial tone will be heard again when this command is entered, which means it
©2012 Makati Corporate Office Services Inc. is located at 28th Floor, Cityland Pasong Tamo
Tower, 2210 Chino Roces Avenue, Makati CIty, Philippines 1200. Trunkline +63 2 893-8909.
B. SYSTEM TRANSFER MODE SETTING
C. PC BILLING SETTING(OPTIONAL)
SYSTEM PROGRAM INSTRUCTION
4
Advertisement
