Advertisement
PABX Telephone Switching System User Manual v1.02
The PBX's are compatible with almost all standard single and multi line touch tone phones.
(multi line phones use multi extensions). A single line phone has access to all CO lines
incoming and outgoing calls essentially turning a single line phone into a 4 line phone.
Transfering and holding of calls are performed using the flash button.,or *. Full Programming
and Operating Instructions are in this manual! All Lines connect using standard RJ-11 plugs.
1.
The PBX is Extendible from 416 to 832 using CO. line card and extension cards .
2.
AUTO ATTENDANT -- up to3 parts of OGM (Recordable Digital Auto Attendant outgoing
message .)
3.
Intercom communication.
4.
Call Parking,call Pick-up.
5.
Extension Password.
6.
Daytime & Night service
7.
Operator Assistant / Auto Attendant
8.
Restrict extension receiving incoming call
9.
Outgoing call restriction .
10. Call Duration Control .
11. Busy and No Answer transfer.
12. Secretary Call.
13. Caller ID.
14. External music source (Optional)
1.
Ext.600 as default console (operator) .
2.
The system working state is daytime service.
3.
Access CO line by dialing 9. Access CO1 by dialing 41, CO2 - 42, CO3 -43, CO8 - 48,
etc...
4.
The operating state is Operator Assistant.
5.
The incoming calls from any CO lines will ring on Ext.600.
6.
The extension numbers are 3 digits, from 600-663.
7.
The original OGM recording of Auto Attendant is turned off and is vacant. Please turn
the auto attendant feature on and record the OGM(s) after installation of this PBX
system.
8.
CO 5, CO 6, --- CO8 are in CO line vacant state.
9.
System programming password is 0000.
10. Transfering mode is patting the "FLASH" button.
©2012 Makati Corporate Office Services Inc. is located at 28th Floor, Cityland Pasong Tamo
Tower, 2210 Chino Roces Avenue, Makati CIty, Philippines 1200. Trunkline +63 2 893-8909.
ADVANCED FUNCTION LIST
A. SYSTEM DEFAULT SETTINGS
3
Advertisement
