Advertisement
PABX Telephone Switching System User Manual v1.02
PRECAUTIONS
PLEASE KEEP ALL CHILDREN AWAY FROM THIS EQUIPMENT!
ONLY CONNECT TO STANDARD 220V/110 VAC 60 HZ – USE AVR TO ENSURE STABLE
POWER. POWER THAT HAS STANDARD 3 PRONG GROUNDED POWER OUTLET.
NEVER RETROFIT OR FORCE THE PLUG INTO A POWER OUTLET.
AVOID ALL LIQUID SPILLS ONTO THE UNIT - IF WATER OR ANY LIQUID SPILLS INTO
UNIT, DISCONNECT FROM POWER IMMEDIATELY. DO NOT RECONNECT THE POWER
UNTIL THE UNIT IS CHECKED BY A COMPETANT TECHNICIAN
THIS UNIT COMPLIES WITH PART 15 OF THE FCC REGULATIONS. IT MUST NOT PUT
OUT INTERFERANCE TO ANY OTHER DEVICE. IT MAY RECEIVE INTERFERENCE FROM
ANY OTHER DEVICE. IF EITHER OF THE ABOVE OCCUR, RE-ORIENT THE UNIT TO
ELIMINATE INTERFERANCE OR DISCONTINUE IT'S USE.
NO USER SERVICEABLE PARTS - DON'T OPEN THE UNIT EXCEPT WHEN POWER IS
DISCONNECTED TO INSTALL UPGRADE CARDS AS NEEDED AND USE PROTECTIVE
GLOVES / EYEWARE WHEN WORKING ON UNIT
KEEP UNIT AWAY FROM MOISTURE, EXCESSIVE HEAT, COLD, SUNLIGHT, OR
SOURCES OF MAGNETIC OR RADIO FREQUENCY RADIATION
All wiring should be done by a competent electrician or interconnect company so that RJ-11
plugs may connect all lines and extensions to the PBX.
©2012 Makati Corporate Office Services Inc. is located at 28th Floor, Cityland Pasong Tamo
2
Tower, 2210 Chino Roces Avenue, Makati CIty, Philippines 1200. Trunkline +63 2 893-8909.
Advertisement
