Advertisement
PABX Telephone Switching System User Manual v1.02
then dial 995*5*#
Explanation: RESET -- Restore the system to default settings.
Item 26. To restore the system to default setting by hardware
Explanation: FOR TECHNICIANS ONLY— When the software reset does not work: To
restore the system to default settings if the software setting above does not work, please
disconnect the power cord and remove the top case. Restore Power being careful not to touch
exposed parts and press K1 micro switch on the PCB board.
Item 27.To set system long time recording
Code:990001#
Explanation:The first part of OGM time will have 20 seconds for your recording. When this
function is set, the second and the third part of OGM will not be effective.
Code:990000#
Explanation: The system will restore three parts of OGM recording mode.
Item 28.To set extension number with three or four digits
Code:990010#
Explanation:Extension number is three digits.
Code:990011#
Explanation:Extension number is four digits.
Remark: After the system set extension number digits, the system should be cut power
supply
and restore turnon the system,the default extension number is three digits,if you want
to
change extension number is four digits.so the extension is for 6000-6630,the lasted add
0 .
Item 29. Connect OGM time
Code:990031 #
Explanation: OGM is connected immediately.
Code:990090#
Explanation:OGM is connected after receiving caller ID numbers.
©2012 Makati Corporate Office Services Inc. is located at 28th Floor, Cityland Pasong Tamo
Tower, 2210 Chino Roces Avenue, Makati CIty, Philippines 1200. Trunkline +63 2 893-8909.
11
Advertisement
