Determining Available Channels - Westinghouse HD LCD TV User Manual

Determining Available Channels

1 When connected to an antenna, cable or other RF (radio frequency)
source, you'll need to run "Autoscan"-available in the "TV" menu of the
OSD in order for all available channels to be received
2 Before starting Autoscan select either Air (Antenna) or Cable for your
RF input. Use the up/down arrow keys to scroll below "Tuner" to "Auto
Scan"
3 Press "Enter" to start scanning for channels (identification of all analog
and digital channels may take several minutes)
Note:
Depending on your area, some channels shown may not be
available for viewing.
• First Time connected to RF the system will automatically select the Autoscan
function.
22