Operating Instructions; Package Contents - Siemens CMCC1020 User Manual

Siemens Building Technologies
Fire & Security Products
5

Operating Instructions

1 Place the monitor on a flat and firm surface (see Safety Precaut ions on page 20).
2 This monitor can be operated between 100 to 240 V AC.
3 Plug the power cord into AC outlet on the wall.
4 Link the A/V terminal from your devices into the audio/video in RC A/BNC
connectors of the monitor.
5 Turn your device system power switch ON. then turn the monitor power switch ON.
The power indicator will be ON at this moment.
6 Allow about 30 seconds for the display tube to warm up, then the image should
appear on the screen.
7 The monitor will detect the f r equency of the input signal automatically, and the
image may be adjusted through the function VR on front control panel.
8 Adjust the user controls to optimise picture quality.
6

Package Contents

Item Qty
Monitor 1
User`s Manual 1
Mains cable 1
GB
27
19.05.2003