Maintenance Tools - Proheat M50 G-II PCM Service Manual

3.0

MAINTENANCE TOOLS

The following list is the minimum recommended tools to properly service the
M-Series. Please refer to the M-Series parts book at www.proheat.com for
additional PROHEAT service tools and computer software.
Minimum Proheat Service Tools
1. Remote Start Switch (P/N PK0091)
2. Temperature Sensor (P/N 200304K for G-II PCM)
3. Test Gauge, Air Pressure Digital Manometer (P/N PK0036)
4. Test Gauge, Air/Fuel Pressure (P/N PK0067)
5. Test Gauge Adaptor (P/N PK0071)
Rotary Vane Compressor Models ONLY (SN 600000 to 699999)
Figure 3-1: Air Pressure — Digital Manometer, Remote Start Switch, Temperature
Sensor, Fuel Pressure Test Gauge and Test Gauge Adaptor.
PROHEAT M-SERIES G-II PCM SERVICE MANUAL 3-1