Use And Maintenance; Requirements Before First Use; Touch Control User Instructions - Teka VTN DC Installation And Maintenance Manual

Table of Contents

Advertisement

Use and Maintenance

GB
Special requirements
before first use
Before connecting the hob to the electric
mains, check that the voltage and fre-
quency of the mains matches what is
shown on the hob's rating plate, which is
located lower down, and on the guarantee
or, where appropriate, the technical datas-
heet supplied, which should be kept toge-
ther with this manual.
The apparatus is not designed to
be used by people (including children)
with reduced physical, mental or sen-
sory abilities. It should also not be used
by people that do not have experience
handling the apparatus or who do not
have knowledge of the apparatus, un-
less they are supervised by a person
who is in charge of their safety.
Children should not be allowed
to play with the apparatus.
Touch control user
CONTROL ELEMENTS (Figs. 7, 8 and 9)
1
On/off sensor.
2
Hotplate selection sensors.
3
Power and/or residual heat indicators
(also shows that locking is activated on
the models shown if figure 8).
4
"Minus" sensor, reduce power/time.
5
Increase power/time sensor (plus).
6
Select double/triple circuit (double or tri-
ple hotplate) sensor.
7
Select timer/countdown timer sensor
(Models TR 640, TC 620, TT 640, TR
735 AB and TR 641).
8
Clock Indicator (Models TR 640, TC
620, TT 640, TR 735 AB and TR 641).
Keylock sensor (except in models
9
shown in figure 8).
22
instructions
Model VT TC 60.3
fig. 7
Models TT 630, TT 600, TB 600,
TC 620, TR 600, TR 735 AB, TR
641 and TM 601
fig. 8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents