Storage Areas; Storing The Cargo Cover; Cargo Cover-Soft Top; Rolling Up The Side Panels - GMC 2004 Defense Owner's Manual

Storage Areas

Cargo Cover-Soft Top

If the vehicle is equipped with a soft top cargo cover, it
must be fully installed and properly anchored before
traveling on the highway. The side panels and rear panel
of the cargo cover can be rolled up. The cargo cover
allows ventilation within the closed portion through
opening vents located on the front of the top.

Rolling Up the Side Panels:

9560
4. Pull apart the velcro flaps on both side panels near
the back of the vehicle.
1. Release tension on
the hooks by pushing
the release on the front
of the hook.
2. Remove the plastic
hook from the bed fas-
tener.
3. Pull apart the velcro
flaps on both side
panels near the vehicle
cab.
5. Roll the sides upward.
6. When the sides reach the top, they can be held in
place by inserting the cargo cover straps in the clips
at the top of the cargo cover.

Storing the Cargo Cover:

1. Release tension on the hooks by pushing the
release on the front of the hook.
2. Remove the plastic hook from the bed fastener.
3. Pull apart the velcro flaps on both side panels near
the vehicle cab.
4. Pull apart the velcro flaps on both panels near
the back of the vehicle.
5. Release the six cover straps, located inside the
cargo box that attaches the cover to the cargo cover
bows.
6. Remove the cover from the cargo cover bows.
7. Fold the cover neatly and store it behind the seat in
the truck cab.
2-5