Pintle Hitch
A pintle hitch is located at the rear of the vehicle, and
is removable from the receiver.
Notice: Before operating, inspect for proper operation,
worn, damaged or missing parts and secure mountings.
Correct as required before use.
Operating the Pintle Hitch:
To Open:
1. Open the latch by removing latch pin (F).
2. Pull up on the lock latch (C) while lifting the latch (D).
To Close:
1. Push the latch (D) until the lock latch (C) locks in
place.
2. Install the latch pin (F).
Installing the Pintle Hitch:
1. Remove any debris from the inside of the receiver.
2. Push the pintle hitch (E) into the receiver.
3. Install the retaining pin (B) into the receiver and the
pintle hitch (E).
4. Install the spring clip (A) into the retaining pin (B).
15367
4-7