7.6.
Remove
the
cover
1. Remove the screws (×4
2. Remove the Rear Terminal cover.
7.7.
Remove the A-Board unit
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (A1, A3, A5, A6, A7, A11, A12,
A30, A51 and A52).
3. Remove the screws (×4
unit.
7.8.
Remove the A-Board
1. Remove the A-Board unit. (See section 7.7.)
2. Remove the screws (×8
Rear
Terminal
, ×2
).
) and remove the A-Board
) and remove the A-Board.
7.9.
Remove the SU-Board
1. Remove the flexible cables (SU1B, SU2B, SU3B, SU4B
and SU5B) connected to the SU-Board.
2. Remove the flexible cable (SU11-SD11) and the bridge
connector (SC41-SU41).
3. Remove the molding prop (×1
4. Remove the screws (×4
7.10. Remove the SD-Board
1. Remove the flexible cables (SD1B, SD2B, SD3B, SD4B
and SD5B) connected to the SD-Board.
2. Remove the flexible cable (SU11-SD11) and the bridge
connectors (SC42-SD42 and SC46-SD46).
3. Remove the molding prop (×1
4. Remove the screws (×4
20
).
) and remove the SU-Board.
).
) and remove the SD-Board.