Disassembly And Assembly Instructions; Remove The Rear Cover; Remove The Fan; Remove The P-Board - Panasonic TH-P65V10D Service Manual

8 Disassembly and Assembly Instructions

8.1.

Remove the Rear cover

1. See Service Hint (Section 3)
8.2.

Remove the Fan

1. Unlock the cable clampers to free the cable.
2. Remove the screws (×3
3. Remove the relay connectors and remove the Fan unit.
4. Remove the screws (×2
5. Remove the Fan.
8.3.

Remove the P-Board

Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable
2. Disconnect the connectors (P51-P52, P53-P54 and P55-
P56).
3. Disconnect the connectors (P2, P6, P7, P9, P11, P25 and
P35).
4. Remove a short-jumper connector P34 and re-use for
new P-Board.
).
) on the back side.
5. Remove the screws (×6
Board.
6. Remove the screws (×9
Board.
8.4. Remove
cover and Rear terminal cover
1. Remove the claw (×1
2. Remove the Side terminal cover.
3. Remove the Adjustment cover.
4. Remove the screws (×2
5. Remove the Rear terminal cover.
20
) and remove the P(SUS)-
) and remove the P(MULTI)-
the Side terminal
).
, ×4
).