System Operation; User Login - CnM 8 Channel H.264 Digital Video Recorder User Manual

2.2 SYSTEM OPERATION

2.2.1 USER LOGIN

1. START-UP
Connect the DC19V/3A Power Adapter to the DVR. When the DVR has started, the 【POW】 LED will be
on and 9 images will be displayed on the screen. If you have setup Power UP recording or Timed
Recording, the system will record automatically and the corresponding LED will be on.
Remark:
1) If there is no HDD in device, or the device didn't read the HDD, or the HDD couldn't be formatted it will
display a【H】in the video preview interface.
2) You must format the HDD in the DVR before first using. The steps to do this are: Main Menu > HDD
Management > Format. After formatting, the system will restart.
2. SYSTEM LOGIN
You can login from the USER LOGIN window as follows. Input the device ID and user password via
the numeric keyboard. You can access the main menu by pressing【Apply】if the password is
enabled.
Note: The Default Device ID is: 00000, User Password is 000000 and Admin Password is 020818.
For your convenience and system safety, you can setup the User Password and change the Device ID in
the Setup. Administrators have complete authority, while operators have limited authority to only watch
and playback.
Device ID: You just need to enter the device ID as the right frame.
Password: enter the admin password or user password.
8