CnM 8 Channel H.264 Digital Video Recorder User Manual page 42

9. Question: System time is not correct?
Answer:
Wrong setting or user did not click "Edit" to confirm.
CMOS Battery is not connected properly.
CMOS Battery is dead. Please change.
10. Question: Why the "Stop recording" using the right mouse button does not work, how to stop
recording?
Answer:
The "Stop recording" using the right mouse button is only suitable for Manual recording. It
can't stop recording when it's in "start recording" or the video using a video plan.
If you want to stop recording, please make sure the system is not set to record at the current
time.
11. Question: Motion detection is not working?
Answer:
The setting of motion detection area is not correct.
Sensitivity is too low.
12. Question: CD-writer / USB backup error
Answer:
The data exceeds the capacity of backup device.
The backup device is incompatible.
The backup device is damaged.
13. Question: Remote control does not work?
Answer:
The address of remote control is not correct
The distance of remote control is too far or the angle used is too great.
Remote control batteries run out.
Remote control is damaged or the front panel of DVR is damaged.
41