2. BACKUP
You can use USB to backup recordings too, by inserting a USB device into the USB2.0 port before
backing up files. USB OTG (On-The-Go) is also supported.
You can select the recording to be backed-up by using the direction keys, pressing【Enter】confirms the
selected file (There will be a tick "√" at the end of any selected recorded files), press【Enter】again the
"√" will disappear which means the selection has been cancelled. You can start to export the selected
recording files by pressing【BACKUP】, as follows:
Instruction:
1. When the available space on the backup device is less than the size of the recording file, the system
will prompt "Space not enough".
2. You can remove USB device directly when backup has finished.
3. RECORD MODE
Move the cursor to 【RECORD】 (Icon highlighted when selected). Press 【Enter】 to enter the setting
menu. Press 【Confirm】 and enter the setup menu option. You can use direction keys and cursor to
change the options.
11