Table of Contents
Advertisement
MEDIA PORT: Same as static setup.
WEB PORT: Same as static setup.
NOTE: Restart the system after selecting DHCP, and it will automatically connect with a DHCP
server. This will allocate an IP address when connected and the address will be shown on the
interface.
3 PPPOE
Select the PPPOE, and enter the interface shown below:
MEDIA PORT: Port for private protocol of DVR and PC, default: 9000. If this port of the computer is
applied by another server, please change to other free port.
WEB PORT: HTTP Port. Default: 80. If admin change WEB port to: e.g. 8088, the port number
should be added behind IP, http://192.168.15.145:8088 should input into IP of IE.
IP address: Fill in the IP address according to the network that the DVR is attached too.
PPPOE username and password: Enter the username and password provided by the internet
service provider. Apply these settings and reboot the system. After rebooting, the device will save
its settings and set PPPOE as the default network type. The IP address will be automatically
configure as a Dynamic IP address issued by the WAN.
23
Hide quick links:
Advertisement
Table of Contents
