AT&T E5828B User Manual page 15

RINGER: 1
OFF LOW HIGH
NOTES:
1. The cordless handset can be temporarily muted by pressing
ringing. The next call will ring normally.
2. If you choose OFF, the cordless handset ringer will be turned off, and the screen will display
RINGER OFF and
screen will displays XX MISSED CALLS and
3. When the volume level is at the maximum or minimum setting, you will hear two alert beeps.
Telephone operation
Handset settings
Selectable handset ringer melodies
This feature allows you to choose one of four
ringing tones (1-4) or turn the ringer off. Use the
CID/-VOLUME or DIR /VOLUME+ button to
hear an example of each ringer tone, then press
SELECT/
• Press MENU
• Press
the screen displays RINGER: and setting.
• Press SELECT/
ting.
• Press
display 1, 2, 3, 4, or OFF. You will hear a sample
of each ringer tone.
• Press SELECT/
ringer tone and exit.
Set handset ringer volume
• Press and hold CID/-VOLUME or DIR /VOLUME+
for about two seconds.
• When the screen displays OFF LOW HIGH,
the current setting will flash.
• Press
select your preference.
• P r e s s S E L E C T /
or MENU/
selection, and exit to idle mode.
when the cordless handset is idle. If there are any un-reviewed calls, the
to select the one you prefer.
TRANSFER
to begin programming.
/CHAN
CID/-VOLUME or DIR /VOLUME+ until
TRANSFER
CID/-VOLUME or DIR /VOLUME+ to
TRANSFER
CID/-VOLUME or DIR /VOLUME+ to
T RA N S F E R
to confirm and save your
CHAN
instead of RINGER OFF and
12
to change current set-
to select the displayed
, O F F /
OFF
/CLEAR during incoming
.
,
C L E A R