Kobalt SM1850LW User Manual page 32

Bevel/Miter Settings
BEVEL
KEY
SETTING
Inside corner - Left side
IL 33.9°
Inside corner - Right side
IR 33.9°
Outside corner - Left side
OL 33.9°
Outside corner - Right side
OR 33.9°
MITER
SETTING
1. Position top of moulding against fence.
31.6° Right 2. Miter table set at RIGHT 31.6°.
3. LEFT side is finished piece.
1. Position bottom of moulding against fence.
31.6° Left 2. Miter table set at LEFT 31.6°.
3. LEFT side is finished piece.
1. Position bottom of moulding against fence.
31.6° Left 2. Miter table set at LEFT 31.6°.
3. RIGHT side is finished piece.
1. Position top of moulding against fence.
31.6° Right 2. Miter table set at RIGHT 31.6°.
3. RIGHT side is finished piece.
32
TYPE OF CUT