Polaroid ProCam Repair Manual page 47

Table 2-1. STAR Tester Controls and Indicators (Con't)
Key No. Control and Indicator
12 HORN Cable Connection
13 Strobe Adapters (Two) *
14 PACK SIMULATOR Jack
15 POWER Switch
16 DC CURRENT Meter
17 DC VOLTS Meter
18 TIMING Meter
19 Test Point Connections
(Not Shown)
* Not used for testing ProCam.
Caution: When Tester is not in constant use, turn selector switch to
7000 ZLS position. This saves wear on light source and keeps
Tester in neutral state, ready for immediate resumption of testing.
Description
Accepts plug on Horn cable.
Aligns electronic flash of 600/680
camera under test to STAR Tester.
Connection for film pack simulation
voltage. Lets Tester function as a
power supply.
AC line voltage On/Off to tester.
Lights when Tester is powered.
Digital readout of energy required to
charge Strobe capacitor.
Digital readout of circuit voltages;
also use with probe in VOLT
PROBE jack.
Digital readout of strobe recycle time
or blade speed.
For connections to oscilloscope.
Also used for calibrating Tester.
2 - 5