Table of Contents
Advertisement
Drive Assembly
1. Disassembly
Note: The following steps assume that Motor Flex Retainer, Motor Flex
Assembly and the Motor have already been removed from the
ProCam.
a. Using a greenstick or small flat screwdriver, remove the Gear Drive
Cover by releasing locking fingers at locations A through D in
Figure 3-46.
C
D
Figure 3-46. Removing Gear Drive Cover from Mainframe
b. Remove Washer from Gear #1 (Figure 3-47).
c. Lift off Wireform Switchblock.
B
3 - 45
A
Hide quick links:
Advertisement
Table of Contents
