Polaroid ProCam Repair Manual page 108

o. To remove Sol 2, depress the Baseblock locking tab "A" and
simultaneously pry the Solenoid upward out of the Baseblock
(Figure 3-44).
p. Remove the Encoder photodiode and Cable Assembly by springing tab
B outward and then upward (Figure 3-44).
LOCKING TAB A
Figure 3-44. Removing Solenoid 2 and Photodiode from Baseblock
BASEBLOCK
ENCODER
PHOTODIODE
3 - 43
SOLENOID 2
TAB B