Installing The Charger - Philips G355 User Manual

Getting started
Figure 2: Installing the battery pack
Attention: When your DECT handset doesn't work (including not
charging the battery pack when the DECT handset is put on
the charger) after installation of a new battery pack the
possible cause could be that no good contact is made
between battery pack and the DECT handset. Please
remove and re-install the battery pack in this case.

Installing the charger

To install the charger, perform the following steps:
1. Place the charger on a flat surface.
2. Connect the AC adapter cable to the terminal on the bottom of the
charger.
16
Handset
Battery
pack