Installing The Base Station; Installing And Replacing The Battery Pack; Battery Life And Range; Connecting The Base And The Charger - Philips Zenia 300 Vox User Manual

Hide thumbs Also See for Zenia 300 Vox:
Table of Contents

Advertisement

To properly install the base station, plug the line cord and the
power cable into the base station. Plug the cord and the cable into
the wall socket.The green indicator on the base station indicates
that the phone is properly installed.
The electrical network is classified as dangerous
according to criteria in the standard EN 60-950.The only way to
power down this product is to unplug the power supply from the
electrical outlet. Ensure the electrical outlet is located close to the
apparatus and is always easily accessible.
Warning : Always use the cables provided with the product.
Do not insert anything in this opening
The battery life is about 250 hours in stand by time (when the handset is in idle mode & ready to receive
a call) and around 16 hours in communication. A low battery alert will inform you that the handset has
to be charged. If this is during a call, the call will end shortly after the alert.
Under ideal conditions the range is a maximum of 50 meters indoors and 300 meters outdoors.When
reaching the range limit, the conversation will become crackly, move closer to the base station otherwise
the call will be cut off.To reach optimal range place the base station away from electrical appliances.
To insert the battery pack, open the battery door on the
handset by sliding it down. Connect the battery pack to the
connector inside the handset.
Place the battery with sticker face up .
When replacing the battery pack, only use Philips rechargeable
battery packs NiMh 2HR AAA 600mAh.
Batteries should not be disposed of with general household waste.
The Zenia 300 Vox handset charger is separate from the base
so that it can be located in the most convenient place regard-
less of the position of the telephone line connection. However,
the handset charger is delivered with an accessory that can be
used for linking together the base and the charger.They form
thus a single aesthetically pleasing unit.This accessory is located
under the charger. It can be fitted as shown on the picture. If
not in use, it can be conveniently stored under the charger.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents