Manually Selecting The Dect System; Enabling Automatic Dect System Selection - Philips G355 User Manual

DECT system configuration
10. Press the
You can now use the handset to dial and receive calls.

Manually selecting the DECT system

If you subscribe the handset to more than one DECT system, you can
manually select which system the handset uses.
To manually subscribe to a DECT system, perform the following steps.:
1. Open the
2. Press the
Network select
Select
3. Press the
Select
4. Choose the name of the system from the list, and
5. Press the

Enabling automatic DECT system selection

If you subscribe the handset to several DECT systems and you configure
the automatic search function, the handset automatically selects the
nearest system. As a result, your handset automatically logs on to
another subscribed DECT system when you leave the effective range of
the current system. If this function is active, the handset will attach to an
42
Clr key one or more times to return to the
idle display.
Connectivity
"Accessing the Connectivity menu" (page
Up or Down
select option.
Select soft key.
then press the Select
The name of the currently active system is
highlighted.
Clr key one or more times to return to the
idle display.
menu as shown in
key to highlight the
soft key.
39).
Network