Charger Wall-Mounting; Battery Performance; Base Station - Philips TD6831 Manuel D'utilisation

2uk onis suppl 19/07/01
Using the handset with an ONIS 200

base station

The additional HANDSET functions in the same manner as the handset which
comes with your Onis 200 or Onis Vox 200 BASE STATION.
With this multi-handset setup you can now:
- make conference calls,
- transfer calls,
- make an external call with two other HANDSETS in an intercom mode (if you
have 3 or more HANDSETS). See instructions for more information.
- use the "babysit" function.
Using the handset with another GAP
standard base station
The GAP standard guarantees minimum operating performance for all handsets and
base stations, irrespective of their make.
Your HANDSET conforms with this standard.
In order to get the most out of your HANDSET, we recommend you read both
these and the manufacturer's instructions.

Charger wall-mounting

Make two holes in the wall, 65mm apart vertically and insert screws.
1
Mount the base using the plastic attachment and pull down.
2

Battery performance

The telephone will work for approximately one week when the HANDSET is away
from the BASE STATION in idle mode and around 15 hours when in use.
• During a call, beeps will provide a warning when only a few seconds of battery life
remain.
Communication will be cut off automatically when after this time.
11:15 Page 6
Additional Onis 200 handset
When your HANDSET is used with a
different make of base station, line
connection, call reception and dialling
functions are guaranteed.
The icon indicates a charge level
below 5% (no bar).You should now charge
the HANDSET
6