Philips G355 User Manual page 45

2. Press the
Register
3. Press the
Select
4. Press the
Empty
5. Press the
Select
Yes
6. Use the
Save
7. Use the
OK
8. Use the
Save
9. Use the
Save
Up or Down
option.
Select soft key to start the registration
process.
Up or Down
there are less than four subscriptions to the system
on the handset, or choose the name of the system
you would like to overwrite.
Select soft key, and then press the
soft key if you want to overwrite a system.
Dialpad to enter the PARK code at the
PARK prompt, and then press the
Attention: Use a PARK code system ID if more
than one DECT system overlaps in your location. If
only one DECT system is available, make no entry,
and press the Skip
Dialpad to enter the PIN (authorisation
code) at the PIN prompt, and then press the
soft key.
Dialpad to enter the system name at the
Network name prompt, and then press the
soft key.
Dialpad to enter the phone number
assigned to your handset at the
and then press the
DECT system configuration
key to highlight the
key to choose
Save
soft key.
Number
Save soft key.
Register
Empty if
Yes
soft key.
OK
Save
prompt,
41