Error Messages - Clever Choice Auto-Code Pro Owner's Manual

Error Messages

MESSAGE
40
WHAT DOES
METER SAY?
Battery is dead.
Please replace.
Test strip has
been used.
Please replace.
System error.
Test strip has
been removed
during testing.
Room tem-
perature is out of
range. Thus un-
able to measure.
WHAT IT
MEANS
Appears when
the batteries
cannot provide
enough power for
a test.
Appears when a
used test strip is
inserted
Problem in opera-
tion.
Appears when
test strip is
removed while
counting down.
Appears when
ambient tem-
perature is below
system operation
range.
Appears when
ambient tem-
perature is above
system operation
range.
ACTION
Replace the bat-
teries immedi-
ately.
Repeat the test
with a new test
strip.
Repeat the test
with a new test
strip.
If the meter still
does not work,
please contact
the customer
service for as-
sistance.
Repeat the test
with a new test
strip.
System
operation range
is 10°F~40°F
(50°C~104°C ).
Repeat the test
after the meter
and test strip are
in the above tem-
perature range.