Test Strip - Clever Choice Auto-Code Pro Owner's Manual

Test Strip

Absorbent Hole
Apply a drop of blood here and the blood will be drawn
in automatically.
Confirmation window
Confirm if enough blood has been applied to the absor-
bent hole of the test strip.
Test Strip Handle
Hold this part to insert the test strip into the slot.
Contact Bars
Insert this end of the test strip into the test slot.
Test results might be wrong if the contact
bar is not fully inserted into the test slot.
The front side of the test strip should face
up when inserting the test strip.
The CLEVER CHOICE Auto-Code Pro meter should only be
used with CLEVER CHOICE Auto-Code Pro Test Strips. Using
other test strips with this meter can produce inaccurate results.
Attention!
NOTE
Front Back
13