Setting Up The Lancing Device - Clever Choice Auto-Code Pro Owner's Manual

Setting Up the Lancing Device

Screw off the cap of the lancing device. Insert
a lancet into the lancet holder and push down
firmly until it is fully in place.
Twist the protective disk until it separates from
the lancet.
Replace the lancing device cap. Turn the cap
until it is snug but not too tight.
The adjustable tip offers 5 levels of skin pen-
etration. Twist the adjustable tip in either direc-
tion until the number lines up with the arrow:
1-2 for soft or thin skin,
3 for average skin,
4-5 for thick or calloused skin.
Slide the cocking control back until it clicks.
If it does not click the device may have been
cocked when the lancet was inserted.
The lancing device is now ready for use. Set aside for later use.
23