Clever Choice Auto-Code Pro Owner's Manual page 17

If you do not want to set an alarm, press
If you want to turn off an alarm, find the alarm number by pressing
in the setting mode, press
At the time of your alarm, the meter will beep and automatically turn
on. You can press
begin testing. If you do not press
utes then switch off. If you do not want to test at this time, press
switch off the meter.
Congratulations! You have completed all settings!
These parameters can ONLY be changed in the setting mode.
If the meter is idle for 3 minutes during the setting mode, it will
switch off automatically.
or to change from "ON' to "OFF".
to silence the alarm and insert a test strip to
, the meter will beep for 2 min-
NOTE
to skip this step.
to
17