26
Ioline FlexJet Service Manual
Control Center menu bar features
File
Download Firmware
Send Plot File
Exit
Communications
Settings
Send Command
Tools
Cartridge Calibration
Reset Machine ID
Size Calibration
Set Machine ID
Set Key Code
Help
About
Allows the user to download the lat-
est firmware version for the FlexJet.
See the FlexJet User Guide for more
information.
Print a PLT or PLX file.
Exit the Control Center.
Select the COM port and baud rate
to match the printer.
Permits advanced users to manually
enter commands.
Displays tools to adjust print
cartridge alignment. See the FlexJet
User Guide for more details.
Resets the machine serial number.
A unique key code, only available
from Ioline customer service, is re-
quired. It is usually only necessary
if the main logic board is changed.
Allows adjustment of the size cali-
bration settings. See the FlexJet User
Guide for more details.
Stores the printer serial number in
permanent memory. This step is
required for upgrading the number
of active print cartridges in machines
pre-wired for expansion.
Sets the license key code to enable
inactive print heads in machines pre-
wired for expansion. It requires that
the serial number is stored in perma-
nent memory with the Set Machine
ID function described above.
Displays Control Center version
information.