Ioline FlexJet Service Manual page 13

The Ioline FlexJet has many fast moving components. To avoid in-
jury and prevent electrical shock, please read and follow these safety
guidelines before attempting to service the printer:
n Do not try to repair the machine without factory authoriza-
tion. Only qualified service personnel should attempt any of
the subsystem testing or replacement procedures that are de-
scribed in this manual. If external mechanical adjustments are
necessary, turn off the printer and disconnect it from all power
sources (both the computer and the wall outlet).
Unless otherwise noted, all subsystem testing or replacement
n
procedures must be performed with the FlexJet turned off and
the power cord removed from the rear panel to avoid the pos-
sibility of electrical shock.
n Before beginning any
subsystem testing or
replacement proce-
dure, make sure that
the FlexJet is on a flat,
stable, clean, and dry
surface.
Keep fingers, hair, and
n
clothing well clear of
the FlexJet whenever
moving parts are be-
ing tested.
n Be careful when
moving or lifting the
printer. Moving the printer requires at least 2 people. To avoid
injury to your fingers, do not lift the printer by the end covers.
Hold the gray bars on the printer to lift or move it. See Figure 1.
Figure 1. Lift the printer head using the gray
bars to avoid injury to your fingers.
Safety &
Cautions
xiii