JVC 0610TMH-MW-ST Instruction Manual page 56

Connecting Your Devices
Connect a Digital Source Device
TV Rear Panel
(INPUT 1
HDMI ANALOG AUDIO)
After the connections have been made,
tighten the screws to secure the cable.
Notes:
• To watch video from your digital source device, make sure your TV is displaying INPUT 1 by
pressing the V1 button on your remote control.
• This TV can accept 480i/60Hz, 480p/60Hz, 720p/60Hz, 1080i/60Hz, 1080p/60Hz,
1080p/30Hz and 1080p/24Hz signals via HDMI.
• The INPUT 1 HDMI ANALOG AUDIO input can only be used with INPUT 1.
Connect a Camcorder
Camcorder
Notes:
• To watch video from your camcorder, make sure your TV is displaying INPUT 4 or INPUT 5
by pressing the V4 or V5 button on your remote control.
• If your device has S-Video Output, you can use that instead of using Composite Cables.
Connect INPUT 4 (S-VIDEO) and S-Video Output with an S-Video Cable.
56
Digital Source Device
L R
DIGITAL OUT
AUDIO OUT
TV Rear Panel (INPUT 1)
INPUT 1
75 Ω
(VHF/UHF)
TV Rear Panel (INPUT 4)
INPUT 2 INPUT 3