JVC 0610TMH-MW-ST Instruction Manual page 11

Install your TV
To prevent the TV from falling, thread the belt through the hole on the back of the stand and
secure it to the TV rack.
Tidying the cables
A cable holder which keeps your connection cables tidy is attached to the back of the stand.
Connect the stand
The LT-32P510 TV stand is not attached to the TV when you purchase it. Please follow the
steps below to connect the stand to the TV.
1) Place the TV face down on a soft cloth on
a table. Insert the TV stand into the TV.
Belt and screw (not included)
2) Insert the 5 screws into the back of the
TV and tighten.
Hole
11