JVC 0610TMH-MW-ST Instruction Manual page 58

Connecting Your Devices
Connect a Computer
Notes:
• Make sure your TV is displaying INPUT 1, INPUT 2, INPUT 3 or INPUT 5 by pressing the V1,
V2, V3 or V5 button on your remote control.
• When you connect a PC using an HDMI-DVI cable, connect an audio cable to INPUT 1 HDMI
ANALOG AUDIO on the TV.
• Use a D-SUB cable which has ferrite cores and is no longer than 3 meters to avoid
electromagnetic disturbances.
• Refer to your computer's manual for more information.
D-SUB
Format Resolution
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x768
WXGA 1280 x 768
WXGA 1360 x 768
Notes:
• Depending on signal quality, some pictures may not be displayed correctly.
• Computers that cannot set the refresh rate to 60 Hz cannot be used with this TV.
• If you are inputting a PC signal that is invalid, "No signal or Signal can not be displayed."
will appear on the TV screen. It appears when the input is PC and it is a single screen.
• When you connect a PC using an HDMI cable, the TV image may not be displayed correctly.
58
PC
PC
V. Frequency H. Frequency
(Hz) (kHz)
60 31.5
60 37.9
60 48.4
60 47.8
60 47.7
Or...
TV Rear Panel (INPUT 1)
75 Ω
(VHF/UHF)
HDMI
Format Resolution
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x768
WXGA 1280 x 768
WXGA 1360 x 768
TV Rear Panel
INPUT 1 INPUT 2
V. Frequency
(Hz)
60
60
60
60
60
INPUT 3
H. Frequency
(kHz)
31.5
37.9
48.4
47.8
47.7